87 – Faxing
CX2731 MFP Basic User’s Guide
Using Transmission and Reception History
You can select a destination from the 10 most recent transmissions
or receptions.
1 Make sure that [Add destination] is selected on the fax standby
screen, then press <OK>.
2 Press the down arrow key repetitively to scroll to [Tx History] or
[Rx History], then press <OK>.
3 Press the down arrow key repetitively to scroll to an entry, then
press <OK>.
The check box is selected. You can select multiple entries.
4 When you have selected all the destinations, press the right
arrow key.
5 Press <OK> to finish.
To Next Page
Loading...
Need help?
General
