88 – Faxing
CX2731 MFP Basic User’s Guide
Using The One-Touch Keypad
The speed dial numbers 1 to 16 are automatically registered to the
One-Touch keypad. To access speed dial numbers 1 through 8, press
the corresponding One-Touch key. To access speed dial numbers 9
through 16, press <SHIFT> while pressing the corresponding
One-Touch key.
1 Press the desired One-Touch key on the control panel.
Press <SHIFT> (17) to select the speed dial numbers 9 to 16
assigned to the One-Touch keypad.
Note
You can also use the One-Touch keypad on the screen that
appears after pressing the <FAX> key. In this case, the fax
standby screen appears after selecting a One-Touch key so that
you can configure other settings for fax functions.
To Next Page
Loading...
