123 – Scanning
CX2731 MFP Basic User’s Guide
4 Press the down arrow key repetitively to scroll to [USBMemory],
then press
<OK>.
5 Press <Mono Start> or <Color Start>.
6 Wait until the message appears that it is okay to remove the USB
device, then remove it.
Scan to Network PC
You can send a scanned document to a server on the network. The
document is scanned and converted to a PDF, JPEG, TIFF, or XPS file.
The default setting is PDF.
Note
• Before starting a scan job, set up a profile.
• For details on how to register a profile, see the Setup Guide
provided with your machine.
1 Press <SCAN> on the control panel.
To Next Page
Loading...
Need help?
General
