89 – Faxing
CX2731 MFP Basic User’s Guide
Deleting Specified Destinations
1 Make sure that the specified destination is selected on the fax
standby screen, then press <OK>.
2 Press the down arrow key repetitively to scroll to a destination
you want to delete, then press <OK>.
The check box is selected. You can select multiple entries.
3 When you have selected all the destinations to be deleted, press
the right arrow key.
4 Make sure that [Delete the destination] is selected, then press
<OK>.
Configuring Fax Settings
You can configure the fax settings to alter the output to suit your
needs. Each setting can be configured from the [Fax Functions] menu
on the fax standby screen.
Perform the following procedures at step 5 of “Sending a Fax”
described above.
To Next Page
Loading...
