Oki CX2731 - Deleting

140 – Scanning
CX2731 MFP Basic User’s Guide
10 Select [Done], then press <OK>.
11 Press the down arrow key repetitively to scroll to [Port No.], then
press
the right arrow key.
12 Enter a port number, then press <OK>.
13 Press <OK>.
Deleting
1 Press <SETTING> on the control panel.
2 Press the down arrow key repetitively to scroll to [Network Scan
Destination], then pre
ss
the right arrow key.
3 Press the down arrow key repetitively to scroll to a number, then
press
the right arrow key.
4 Press the down arrow key repetitively to scroll to [Delete], then
press <OK>.
5 Press the left or right arrow key to select [Yes], then press
<OK>.