92 – Faxing
CX2731 MFP Basic User’s Guide
Canceling a Reserved Fax Job
1 Press <FAX> on the control panel.
2 Make sure that [Fax] is selected, then press <OK> to open the
fax standby screen.
3 Press the down arrow to select [Fax Job View/Cancel], then press
<OK>.
4 Press the down arrow key repetitively to scroll to the job you
want to cancel, then press <OK>.
5 Check the job contents, then press the right arrow key.
6 Press the down arrow key to select [Delete], then press <OK>.
7 Press the left or right arrow key to select [Yes], then press
<OK>.
Important!
When you select a broadcast job, the job itself is cancelled.
To cancel an individual destination in a broadcast job, see
the Advanced User’s Guide at www.my.okidata.com.
Note
The job that is being transmitted appears at the top of the list.
To Next Page
Loading...
Need help?
General
