49 – Print Media
CX2731 MFP Basic User’s Guide
Registering Custom Sizes
To load custom size paper, you need to register the width and length
of the paper before printing. The range of the sizes you can set
differs according to the paper tray.
Note
• For tray 1 and tray 2, you can configure the [Custom] setting
only when [Paper Size] is set to [Custom].
• The available size range for duplex printing is the same as that
for tray 2.
1 Press the <SETTING> key on the control panel.
Tray Available size range
Tray 1 Width:
4.1 to 8.5 inches
105 to 216 mm
Length:
5.8 to 14.0 inches
148 to 356 mm
Tray 2
(optional)
Width:
5.8 to 8.5 inches
148 to 216 mm
Length:\
8.3 to 14.0 inches
148 to 356 mm
MP tray Width:
2.5 to 8.5 inches
64 to 216 mm
Length:
5.0 to 52.0 inches
127 to 1321 mm
To Next Page
Loading...
Need help?
General
