75 – Copying
CX2731 MFP Basic User’s Guide
Making Enlarged or Reduced Copies
(Zoom)
Note
The [Paper Feed] setting interacts with the [Zoom] setting.
• [Zoom] is automatically set to [100%] when [Paper Feed] is set
to [Auto].
• To use specific zoom settings, change the [Paper Feed] setting
to a specific tray first, then set [Zoom].
You can set the zoom ratio in the following three ways:
•Auto
In Auto mode, the zoom ratio is automatically determined
according to the selected scan size and paper tray.
You can use [Auto] only when copying on A4, A5, B5, letter, legal
13/13.5/14, and executive paper.
• Using a preset zoom ratio
• Setting a specific zoom ratio
You can set a ratio of from 25 to 400% in 1% increments using the
keypad
Setting the Zoom Mode
1 Press the right arrow key to enter the [Change settings] menu.
2 Press the down arrow key repetitively to scroll to [Zoom], then
press <OK>.
3 Press the down arrow key repetitively to scroll to the zoom
setting of your choice, then press
<OK>.
4 If you selected [Zoom (25-400%)], you will be prompted to enter
the desired value. Use the keypad to enter the zoom value in 1%
increments, then press <OK>. If you enter an incorrect value,
press <CLEAR> and enter the correct value.
To Next Page
Loading...
Need help?
General
