93 – Faxing
CX2731 MFP Basic User’s Guide
Checking Transmission and Reception
History
Note
If a fax is being transmitted, you can check the transmission on
the [Fax Job View/Cancel] screen.
1 Press <FAX> on the control panel.
2 Make sure that [Fax] is selected, then press <OK> to open the
fax standby screen.
3 Press the down arrow key repetitively to scroll to [Fax History],
then press <OK>.
4 Press the down arrow key repetitively to scroll to [Tx History] or
[Rx History], then press <OK>.
5 Press the down arrow key repetitively to scroll to the job you
want to check, then press <OK>.
6 Check the job contents, then press <OK>.
To Next Page
Loading...
