129 – Scanning
CX2731 MFP Basic User’s Guide
Important!
• Install an application (ActKey, PaperPort, etc.) and a
scanner driver before starting a scan job.
• If you connect the machine to network, follow these
instructions.
- Set [TCP/IP] setting to [Enable].
- Conform the IP version of the machine to that of your
computer.
- Set up the DNS server.
- Enable the network TWAIN setting.
Simple Scan Mode (for Windows)
1 Press <SCAN> on the control panel.
2 Place your document with text face up in the ADF (1) or face
down on the document glass (2).
To Next Page
Loading...
Need help?
General
