111 – Faxing
CX2731 MFP Basic User’s Guide
3 Press the down arrow key to select [Internet FAX], then press
<OK>.
4 Configure the internet fax settings if necessary.
Note
For details on the internet fax settings, see the Advanced User’s
Guide on www.my.okidata.com.
5 Make sure that [Add destination] is selected, then press <OK>.
6 Make sure that [To] is selected, then press <OK>.
Press the down arrow key to select [Cc] or [Bcc] if necessary.
7 Press the down arrow key repetitively to scroll to a destination
entry method, then press <OK>.
8 Specify a destination.
Note
• You can specify only e-mail addresses.
• You can specify a destination by direct input or from the address
book, groups, transmission histories, or LDAP search. For details
on each procedure, see pages 84, ff.
To Next Page
Loading...
