Oki CX2731 - Page 152

152 – User Authentication and Access Control
CX2731 MFP Basic User’s Guide
This procedure uses Windows 7 and NotePad as an example. The
procedures and menus may differ depending on the operating
system/application you use.
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Select the printer driver you want and click [Preferences] or
[Properties].
4 Select the [Job Options] tab and click [User Auth.].
5 Click the [Use User Authentication] check box.
6 Enter your assigned user name in [Username] and password in
[Password].
7 Click [OK].
8 Click [OK], then click [Print].