Omron eCobra 600 - Page 137

Chapter 7: Optional Equipment Installation
1
2
Figure 7-12. Removing the Cable Strap Plate
Table 7-14. Removing the Cable Strap Plate Description
Item Description
1 Two M5 x 8 screws
2 CableStrap Plate
c.
Remove the four screws from the Joint 1 cover. See the following figure. Retain
the screws for re-assembly.
1
2
3
Figure 7-13. Connecting Spare Air Line to User Connector
14402-000 Rev. F eCobra User's Guide 137