Oracle X6-2 - Page 240

BIOS Advanced Menu Selections
240 Oracle Server X6-2 Service Manual • June 2016
Setup Options Options Defaults Description
Current IPv6 Auto
Configuration (R/O)
Stateful/Stateless Stateless Current IPv6
autoconfiguration
parameters are displayed.
Link Local IPv6 Address
(R/O)
Current link local IPv6
address is displayed.
Example: fe80::214:
4fff:feca:5f7e/64
Static IPv6 Address (R/O) Current static IPv6 address
is displayed.
Example: 2001:0db0:000:
82a1:0000:0000:1234:
abcd
IPv6 Gateway (R/O) Current IPv6 gateway
address is displayed.
Example: fe80::211:
5dff:febe:5000/128
Dynamic IPv6 Address 1-n
(R/O)
Current dynamic IPv6
addresses are displayed.
Example: fec0:a:8:b7:
214:4fff:feca:5f7e/64
Refresh Select Refresh to update to
the current settings.
IPv6 State Disabled/Enabled Disabled Set the IPv6 state to
enabled or disabled.
Auto IPv6 Configuration Disabled/
Stateless/
Dhcpv6_stateless/
Dhcpv6_stateful
Disabled Autoconfiguration options
are:
■ Disabled: When
autoconfiguration
is disabled, only the
Link Local address
is set. None of the
autoconfiguration
options to configure an
IPv6 address are run.
■ Stateless: When
enabled, the
IPv6 Stateless
autoconfiguration
is run to learn the
IPv6 addresses for the
device.
■ Dhcpv6_stateless:
When enabled, the
Dhcpv6_stateless
autoconfiguration
is run to learn the
DNS and domain