Oracle X6-2 - Page 25

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface
Troubleshooting and Diagnostics 25
Depending on the component, you might need to clear the fault in Oracle ILOM. Generally,
components that have a FRU ID clear the fault automatically.
Related Information:
■
See “Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface” on page 25
Troubleshoot Hardware Faults Using the Oracle ILOM Web
Interface
Note - The screens shown in this procedure might differ from those for your server.
This procedure uses the basic troubleshooting steps described in “Basic Troubleshooting
Process” on page 24.
Use this procedure to troubleshoot hardware faults with the Oracle ILOM web interface and, if
necessary, prepare the server for service.
Note - This procedure provides one basic approach to troubleshooting hardware faults. It uses
a combination of the Oracle ILOM web interface and the command-line interface (CLI). This
procedure can be performed using only the Oracle ILOM CLI interface. For more information
about the Oracle ILOM web interface and CLI, refer to http://www.oracle.com/goto/ilom/
docs.
Before You Begin
■
Obtain the latest version of the Oracle Server X6-2 Product Notes at http://www.oracle.
com/goto/x6-2/docs.
1.
Log in to the server SP Oracle ILOM web interface.
Open a browser and direct it using the IP address of the server SP. At the login screen, type
a user name (with administrator privileges) and password at the log-in screen. The Summary
Information screen appears.
The Status section of the Summary Information screen provides information about the server
subsystems, including:
■
Processors
■
Memory
■
Power
■
Cooling
■
Storage
■
Networking