Install an Internal USB Flash Drive
2.
Insert the flash drive into the USB slot.
3.
Return the server to operation.
a.
Install the server top cover.
See “Install the Server Top Cover” on page 218.
b.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 220.
c.
Reconnect the power cords and data cables to the server.
See “Reconnect Power and Data Cables” on page 222.
d.
Power on the server.
See “Power On the Server” on page 222.
e.
Verify that the power supply AC OK LED is lit.
Related Information
■
“Remove an Internal USB Flash Drive” on page 109
Servicing an Internal USB Flash Drive (CRU) 111
To Next Page
Loading...
Need help?
General
