Install an Internal USB Flash Drive
b.
Extend the server into maintenance position.
See “Extend the Server to the Maintenance Position” on page 62.
c.
Attach an antistatic wrist strap to your wrist, and then to a metal area on the
chassis.
See “Take Antistatic Measures” on page 65.
d.
Remove the server top cover.
See “Remove the Server Top Cover” on page 65.
2.
To remove a USB flash drive, grasp the flash drive and pull it from the slot.
Related Information
■
“Install an Internal USB Flash Drive” on page 110
Install an Internal USB Flash Drive
1.
Unpack the replacement USB flash drive.
110 Oracle Server X8-2L Service Manual • January 2021