Oracle X8-2L Service Manual

BIOS Advanced Menu Selections
BIOS Advanced Menu PCH SATA Configuration
Options
The following table describes the BIOS Advanced Menu PCH SATA configuration options.
Setup Options Options Defaults Description
SATA Controller Disable/Enable Enable Enable or disable SATA
controller.
Configure SATA as AHCI/RAID AHCI Configure SATA as AHCI or
RAID.
SATA test mode Disable/Enable Disable Enable or disable SATA test
mode.
SATA RSTe Boot Info Disable/Enable Enable Enable this setting to provide
full int13h support for SATA
controller attached devices.
Note - This option is available
only if Configure SATA as is
set to RAID.
SATA Mode Options Select SATA mode related
options.
SATA HDD Unlock Disable/Enable Enable Enable or disable SATA HDD
unlock.
SATA LED Locate Disable/Enable Enable Enable or disable SATA LED
locate.
Support Aggressive Link Power
Management
Disable/Enable Enable Enable or disable aggressive link
power management.
Alternate Device ID on RAID Disable/Enable Disable Enable or disable an alternate
device ID on RAID devices.
Note - This option is available
only if Configure SATA as is
set to RAID.
Load EFI Driver for RAID Disable/Enable Disable Load EFI driver in RAID mode.
Note - This option is available
only if Configure SATA as is
set to RAID.
NVRAM CYCLE ROUTER 0
ENABLE
Disable/Enable Disable Enable or disable cycle router 0
for NVRAM Remapping engine.
NVRAM CR0 PCIE Root Port
Number
PCI Express Root Port 1…20
None PCI Express Root Port
Choose a RootPort that is
enabled for router cycle 0 for
NVRAM engine.
NVRAM CYCLE ROUTER 1
ENABLE
Disable/Enable Disable Enable or disable cycle router 1
for NVRAM Remapping engine.
BIOS Setup Utility Menu Options 271

Oracle X8-2L Specifications

General

Brand	Oracle
Model	X8-2L
Category	Server
Language	English