Oracle X8-2L Service Manual

Monitoring Components and Identifying SNMP
Messages
This section includes information about monitoring components and identifying SNMP
messages for the Oracle Server X8-2L.
■
“Monitoring Component Health and Faults Using Oracle ILOM” on page 289
■
“Monitoring System Components” on page 290
■
“Identifying SNMP Trap Messages” on page 300
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) 5.0 Documentation Library at: https://
www.oracle.com/goto/ilom/docs
Monitoring Component Health and Faults Using Oracle
ILOM
The Oracle ILOM 5.0 interfaces provide easy-to-view information about the health status of
system components. From the Oracle ILOM web interface or in the Oracle ILOM command-
line interface (CLI), you can collect system-specific information about the server, determine the
health state of discrete components, and view any open problems on the server. Oracle ILOM
automatically detects system hardware faults and environmental conditions on the server. If a
problem occurs on the server, Oracle ILOM will automatically do the following:
■
Illuminate the Fault-Service Required LED status indicator on the server front and
back panels. See “Troubleshooting Using the Server Front and Back Panel Status
Indicators” on page 30 and “Monitoring System Components” on page 290.
■
Identify the faulted component in the Open Problems table. Open problems detected on
a host server or system chassis are viewable from either the Open Problems web page
or the /System/Open_problems CLI target. Refer to View Open Problems Detected on a
Monitoring Components and Identifying SNMP Messages 289

Oracle X8-2L Specifications

General

Brand	Oracle
Model	X8-2L
Category	Server
Language	English