Preparing the Server for Component Replacement
■
“Powering Down the Server” on page 55
■
“Disconnect Cables From the Server” on page 61
■
“Extend the Server to the Maintenance Position” on page 62
■
“Remove the Server From the Rack” on page 64
■
“Take Antistatic Measures” on page 65
■
“Remove the Server Top Cover” on page 65
Related Information
■
“Returning the Server to Operation” on page 217
Powering Down the Server
Determine how you want to power down the server by reviewing the options in the following
table.
Note - Some server components, such as storage drives, power supplies, fan modules, and M.2
flash SSDs are hot-pluggable. Components that are hot-pluggable do not require the server to be
powered down when performing service procedures.
Description Link
Power down the server gracefully to prevent data from
being corrupted. Performing a graceful shutdown ensures
that the system is ready for restart.
■ “Power Down the Server Gracefully Using the
Oracle ILOM CLI” on page 56
■ “Power Down the Server Gracefully Using the
Oracle ILOM Web Interface” on page 57
■ “Power Down the Server Gracefully Using the On/
Standby Button” on page 58
If the server is not responding, or you must shut down
the server quickly, perform an immediate shutdown.
■ “Power Down the Server for Immediate Shutdown
Using the Oracle ILOM CLI” on page 59
■ “Power Down the Server for Immediate
Shutdown Using the Oracle ILOM Web
Interface” on page 60
■ “Power Down the Server for Immediate Shutdown
Using the On/Standby Button” on page 60
Related Information
■
“Power On the Server” on page 222
Preparing for Service 55
To Next Page
Loading...
Need help?
General
