Power Down the Server for Immediate Shutdown Using the Oracle ILOM Web Interface
Power Down the Server for Immediate Shutdown Using the
Oracle ILOM Web Interface
Caution - An immediate power-off might corrupt system data, therefore, use this procedure to
power down the server only after attempting the graceful power down procedure.
1.
Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information → Summary Information page appears.
2.
In the left pane, click Host Management → Power Control, and click Immediate
Power Off in the Select Action list.
3.
Click Save, and then click OK.
The server powers down immediately to Standby power mode.
4.
Disconnect the power and data cables from the server.
See “Disconnect Cables From the Server” on page 61.
Caution - When you power down the server using Oracle ILOM, the server enters Standby
power mode. Power is still directed to the service processor and power supply fans. To
completely power off the server, you must disconnect the power cords from the power supplies.
Related Information
■
“Power Down the Server for Immediate Shutdown Using the On/Standby
Button” on page 60
■
“Power Down the Server for Immediate Shutdown Using the Oracle ILOM
CLI” on page 59
■
“Power On the Server” on page 222
Power Down the Server for Immediate Shutdown Using the
On/Standby Button
Caution - An immediate power-off might corrupt system data, therefore, use this procedure to
power down the server only after attempting the graceful power down procedure.
1.
Press and hold the On/Standby button for four seconds to force the Main power
off and to enter Standby power mode.
60 Oracle Server X8-2L Service Manual • January 2021
To Next Page
Loading...
Need help?
General
