Take Antistatic Measures
Take Antistatic Measures
1.
Prepare an antistatic surface on which to set parts during removal and
installation.
Place electrostatic discharge (ESD)-sensitive components on an antistatic mat. The following
items can be used as an antistatic mat:
■
An antistatic bag used to wrap a replacement part
■
An Oracle ESD mat (orderable item)
■
A disposable ESD mat (shipped with some replacement parts or optional system
components)
2.
Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis. Then perform procedures for servicing the server.
Note - An antistatic wrist strap is not included in the Accessory Kit for the server. However,
antistatic wrist straps might be included with options and components.
Related Information
■
“Extend the Server to the Maintenance Position” on page 62
■
“Remove the Server From the Rack” on page 64
■
“Remove the Server Top Cover” on page 65
■
“Remove Antistatic Measures” on page 219
Remove the Server Top Cover
Servicing some components requires that the top cover be removed.
1.
Ensure that AC power cords are disconnected from the server power supplies.
Note - Fan modules and M.2 flash SSDs are hot-pluggable and do not require AC power cables
to be disconnected from the server power supplies.
Preparing for Service 65
To Next Page
Loading...
Need help?
General
