Attaching Devices to the Server
Diagnostic Tool Documentation
The following table identifies where you can find more information about diagnostic tools.
Diagnostic Tool Documentation Location
Oracle ILOM Oracle Integrated Lights Out Manager
5.0 Documentation Library
https://www.oracle.com/goto/
ilom/docs
UEFI Diagnostics or HWdiag Oracle x86 Servers Diagnostics and
Troubleshooting Guide for Servers With
Oracle ILOM 5.0.x
https://www.oracle.com/goto/
x86admindiag/docs
System indicators and sensors This document “Troubleshooting Using the Server
Front and Back Panel Status
Indicators” on page 30
Oracle VTS Oracle VTS software and
documentation
https://docs.oracle.com/cd/
E83848_01/
Attaching Devices to the Server
The following sections contain procedural information for attaching devices to the server so you
can access diagnostic tools when troubleshooting and servicing the server:
■
“Attach Devices to the Server” on page 40
■
“Back Panel Connector Locations” on page 41
■
“Configuring Serial Port Sharing” on page 42
■
“Server Operating System Names for the NVMe Storage Drives” on page 44
■
“Ethernet Device Naming” on page 45
■
“MAC Address Mapping to Ethernet Ports” on page 45
■
“Back Panel Pinhole Switches” on page 46
Attach Devices to the Server
This procedure explains how to connect devices to the server (remotely and locally), so that you
can interact with the service processor (SP) and the server console.
40 Oracle Server X8-2L Service Manual • January 2021
To Next Page
Loading...
Need help?
General
