Oracle X8-2L Service Manual

Install a Processor
As you tighten nuts 3 and 4, some resistance occurs as the bolster leaf spring rises and
comes in contact with the heatsink.
Caution - Using an incorrect torque setting or driver bit can damage a processor-heatsink
module.
5.
Return the server to operation.
a.
Install the air baffle.
See “Install the Air Baffle” on page 115.
b.
Install the server top cover.
See “Install the Server Top Cover” on page 218.
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 220.
d.
Reconnect the power cords to the power supplies, and power on the server.
See “Reconnect Power and Data Cables” on page 222 and “Power On the
Server” on page 222.
e.
Verify that the power supply AC OK LED is lit.
6.
Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 5.0 Documentation Library at
https://www.oracle.com/goto/ilom/docs for more information about the following steps.
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
-> show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
156 Oracle Server X8-2L Service Manual • January 2021

Oracle X8-2L Specifications

General

Brand	Oracle
Model	X8-2L
Category	Server
Language	English