Power On the Server
Power on the server to Main power mode by performing one of the following
actions:
■ Press the On/Standby button on the front bezel.
■ Log in to the Oracle ILOM web interface, click Host Management → Power
Control and select Power On from the Select Action list.
■ Log in to the Oracle ILOM command-line interface (CLI), and type the
following command at the Oracle ILOM prompt:
-> start /System
When the server is powered on to Main power mode and the power-on self-test (POST)
code checkpoint tests have completed, the green System OK LED status indicator on the
front panel of the server lights and remains lit.
Related Information
■
“Powering Down the Server” on page 55
■
“Reconnect Power and Data Cables” on page 222
Returning the Server to Operation 223
To Next Page
Loading...
