Configure I/O Resource Allocation
4.
On the Add In Cards screen, select the slot in which you want to configure the
card and press Enter.
5.
On the IO resource allocation screen for that card, select IO Enable and press
Enter. Do one of the following:
■
Select Enabled to enable I/O resource allocation for the I/O card.
■
Select Disabled to disable I/O resource allocation for the I/O card.
6.
Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
■
“Access BIOS Setup Utility Menus” on page 233
■
“BIOS Setup Utility Menus” on page 232
■
“Exit BIOS Setup Utility” on page 259
Setting Up BIOS Configuration Parameters 247
To Next Page
Loading...
