Using Schedule Windows
Pipeline User’s Guide
135
74-0085-05
The Schedule Panel Toolbar
The schedule toolbar displays vertically, just to the left of the schedule panel. It provides easy access to
various schedule commands you use to create and manage clip events.
Figure 8–7. Schedule Toolbar.
Add Clip. Use to add a new clip event. Each time you add an event, it is added as early in the schedule as
possible, where space is available. The newly-created clip is automatically selected so that you can
immediately display its properties and add metadata, or adjust start and stop times.
Information. Click to display the property sheet for the selected clip.
Review. Review the local clip.
Delete. Click to remove the selected clip event from the schedule. When you remove a clip event, the
actual file that it references (if present) is left intact – it is not deleted.
Zoom In/Zoom Out. Use the top magnification glass icon to zoom in on your schedule, and use the
bottom magnification icon to zoom out. You can also use the slider to dynamically zoom your schedule.
When you zoom out all the way, on most monitors you can view the entire schedule from an hourly
perspective. As you zoom in closer and closer, you can view half and quarter hours, 5 minutes, one
minute. Zoom to the magnification that is best for the size of clips you’re working with.
Select and show the first clip. Click to select and zoom in on the first clip in the schedule.
Select and show the previous clip. Click to select and zoom in on the clip immediately prior to the
currently-selected clip.
Go to Current Time. With the time source (Auto, RS422, etc.) and Pipeline selected, click to scroll the
schedule so that the current time is as close to the center of the schedule as possible, so that it is visible. If
you are not connected to a Pipeline device, Pipeline Control displays the schedule beginning at midnight.
Select and show the next clip. Click to select and zoom in on the next clip after the selected clip.
Select and show the last clip. Click to select and zoom in on the last clip in the schedule.
Add a new clip event
Zoom in
Display properties of the selected clip event
Review local clips
Delete the selected clip event
Zoom out
Select previous event
Select first clip event
Select next event
Zoom Slider
Select last event
Go to the current time
To Next Page
Loading...