Chapter 4
Using Pipeline Direct
48
March, 2009
Audio Sent The number of audio frames sent during capture over RTP.
Status Sent The number of status frames sent during capture over RTP.
Video Encode Time Number of microseconds it took to process the current video frame.
Video Queue The number of video frames dropped due to excessive network traffic. If
this number is greater than zero, you’re losing frames and quality.
Determine the cause of the error and reprocess the media
Audio Queue The number of audio frames dropped due to excessive network traffic. If
this number is greater than zero, you’re losing frames and quality.
Determine the cause of the error and reprocess the media
Status Queue The number of status frames dropped due to excessive network traffic.
Video Sequence Count of frames where the timecode (as observed on the RS-422
connection) was not incrementally increasing.
Audio Align Number of times the audio processor re-synchronized due to an
Embedded SDI audio error.
Video Align Number of times the video processor had to re-synchronize due to an
SDI video error.
Video Frame Exceeded CBR codec error counter.
Audio Frames Requested During playout, Pipeline requests audio and video frames serially. This is
the number of audio frames requested, and should be the same number
as Audio Frames Received.
Audio Frames Received Number of audio frames received during playout.
Video Frames Requested Number of video frames requested during playout. Should be the same
number as Video Frames Received
Video Frames Received Number of video frames received during playout.
TCP retransmissions Number of times TCP packets had to be retransmitted.
Value Description
To Next Page
Loading...