Chapter 5
Using Pipeline with FlipFactory
68
March, 2009
Table 5–2. Capture tab controls and descriptions.
Control Description
Metadata fields Fill in the editable metadata fields for this clip for submission with the job.
The clip name automatically increments the numeric suffix on the name.
Automatic Time Code Select when you want to specify a mark-in and mark-out point to capture.
The tab displays Add to Queue and Close buttons at the bottom.
Mark In Use VTR controls to control your video, click Mark to capture the mark-in
value, or enter the value in the HH:MM:SS:FF field and click GOTO to
jump to this timecode.
Non-drop-frame timecode separators are all colons. Drop-frame notation
applies a semi-colon between the second and frame values. For
example: 00:29:30;16 is a drop-frame timecode.
Mark Out Use VTR controls to control your video, click Mark to capture the mark-
out value, or enter the value in the HH:MM:SS:FF field and click GOTO to
jump to this timecode.
Duration Displays the current length of the clip, based on the difference between
the mark-in and mark-out values. If you manually edit the duration, the
mark-out timecode is automatically adjusted to compensate for the
change.
Video Check to capture the video stream.
Audio Check to capture the audio stream.
Add to Queue Click to submit a job. These jobs are held for processing until the Pipeline
is free (the Capture Editor is closed). If you have checked Defer in the
Submit Job window, the job will be processed according to the schedule
you set. Otherwise, it will be processed as soon as possible based on
scheduling priorities in FlipFactory and availability of the Pipeline.
Multiple clips can be queued up. When all clips are queued, click Close.
Close Click to close the Capture Editor, disconnecting from Pipeline and freeing
it for attachment by FlipFactory and allowing all queued jobs to process.
Manual Select when you want to crash record from the current stream.
Duration Specify the duration of the clip to capture.
Flip It! Click to submit a job to FlipFactory for processing. If you have checked
Defer in the Submit Job window, the job will be processed according to
the schedule you set. Otherwise, it will be processed as soon as possible
based on scheduling priorities in the FlipFactory and availability of the
Pipeline. Flip It! closes the Capture Editor immediately to free the
Pipeline and allow Pipeline jobs to be immediately processed.
To Next Page
Loading...