Planmeca ProOne - Second TMJ Exposure: Positioning for Jaw Open

3 PROGRAM SETTINGS Chapter B: SETTINGS
54 Planmeca ProOne Technical manual
NOTE
This option will be shown on the display only if a USB memory stick is connected to the X-
ray unit. When a USB memory stick is plugged in, images can be saved on the memory
stick or on the computer.
Touch the
Save images on USB memory stick field to switch the function on. To switch the
function off, touch the field again. The field will be shown highlighted (green) when the
function is switched on.
Accept your selection by touching the green check mark button in the bottom right corner
of the display. To exit the display without saving the changes, touch the red cross button in
the bottom left corner of the display.
The
Patient field will appear on the main display when the Save images on USB memory
stick
function is switched on. Enter the patient name as described in the User’s Manual.
The patient name will be shown in the image list on the
Imaging without PC (P2600)
display.
NOTE
We recommend that you always enter the patient name before you take an exposure. This
will ensure that images of different patients cannot be mixed up.
When you take an exposure the image will be saved on the USB memory stick and not on
the computer. Note, however, that the saving process will now take a few seconds longer
and you should not switch the X-ray unit off immediately after you have taken an
exposure. When using a USB memory stick, wait for approx. 15 seconds before you
switch the X-ray unit off after exposure.
When you have taken an exposure the image information (date, time, patient name if
used) will be shown in the image list on the
Imaging without PC (P2600) display. Use the
up or down arrow to select an image from the list. The selected image will be shown
highlighted. You can then use the function buttons at the bottom of the display:
Scroll up/down
to select image
Send selected
image to Romexis
Show selected image
Delete selected image
from USB memory stick
in preview window
Green -> Save on USB
White -> Save on PC
Image list
from list