10
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
10.51
5. Install the adjustment set screw and turn clockwise
until stationary pad contacts disc, then back off 1/2
turn (counterclockwise).
6. Verify fluid level in reservoir is up to MAX line inside
reservoir and install reservoir cap.
Master Cylinder Fluid
Up to MAX line inside reservoir
7. Install front wheels. Refer to “Wheel Installation”
page procedure.
NOTICE
If new pads are installed, refer to “Brake Burnishing
Procedure” page 10.8.
BRAKE SYSTEM
To Next Page
Loading...
