13.40
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
© Copyright Polaris Inc.
RIDE COMMAND SYSTEM
RIDE COMMAND OVERVIEW
For units equipped with Ride Command, reference the
owner’s manual for software, display setting, and user
information. See page .
RIDE COMMAND DISPLAY REMOVAL /
INSTALLATION
1. Remove Hood by turning 1/4 turn fasteners.
2. Remove seven push pins
q
retaining upper dash
panel.
3. Disconnect Ride Command Display electrical
connectors
w
.
4. Remove four fasteners
e
securing Ride Command
Display Mount.
5. Remove three fasteners
r
securing Ride Command
Display to its mount.
FACTORY-INSTALLED OPTIONS
To Next Page
Loading...
Need help?
General
