Crankshaft, Main Bearings, and Flywheel
02
040
30
RG,RG34710,176 –19–05SEP02–2/3
NOTE: DO NOT PRY crankshaft on No. 5 main thrust
bearing.
6. Gently pry crankshaft rearward and then forward to
align thrust washers on No. 5 main thrust bearing.
7. Tighten No. 5 main thrust bearing cap screws to the
following specification.
Specification
Crankshaft Main Bearing Cap
Screws—Initial Torque 68 N•m (50 lb-ft)..............................................
8. Tighten all main bearing cap screws (including No.
5) to the following specification.
Specification
Crankshaft Main Bearing Cap
Screws—Final Torque 320 N•m (236 lb-ft)..........................................
9. Turn crankshaft by hand. If it does not turn easily,
disassemble parts and determine the cause.
Continued on next page
CTM100 (06APR04)
02-040-30
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=226
To Next Page
Loading...