Crankshaft, Main Bearings, and Flywheel
02
040
38
RG,RG34710,179 –19–05SEP02–6/6
18. Install adjustable fan drive assembly and tighten cap
screws to specifications.
Specification
Adjustable Fan Drive Assembly
Mounting Cap Screws—Torque 90 N•m (66 lb-ft)......................................
NOTE: Whenever the timing gear cover has been
removed and reinstalled, the crankshaft position
sensor must be checked to ensure proper
distance from crankshaft timing wheel. This
applies even if the sensor was not removed from
timing gear cover.
19. Install crankshaft position sensor, if removed, or
check sensor-to-crankshaft timing wheel dimension.
See REMOVE AND INSTALL CRANKSHAFT
POSITION SENSOR in the appropriate fuel systems
manual.
Delphi/Lucas ECU controlled fuel systems:
• See REMOVE AND INSTALL CRANKSHAFT
POSITION SENSOR in CTM 115, Section 02,
Group 110.
John Deere Level 6 ECU controlled fuel systems:
• See REMOVE AND INSTALL CRANKSHAFT
POSITION SENSOR in CTM 188, Section 02,
Group 110.
CTM100 (06APR04)
02-040-38
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=234
To Next Page
Loading...
General