Repair and General OEM Specifications
06
200
11
OUO1004,0000BCF –19–02NOV00–3/5
Item Measurement Specification
Cylinder Liner Flange Thickness 9.525—9.575 mm (0.3750—0.3770
in.)
Tongue-and-Groove Connecting Rod Initial Torque 27 N•m (20 lb-ft)
Cap Screw
Tongue-and-Groove Connecting Rod Final Torque 75 N•m (55 lb-ft) plus 90—100° turn
Cap Screw clockwise
PRECISION JOINT Connecting Torque 140 N•m (103 lb-ft) plus 90—100°
Rod Cap Screw turn clockwise
Crankshaft Rod Journal OD 88.844—88.874 mm (3.4980—
3.4990 in.)
Connecting Rod Bearing for ID 88.93—88.98 mm (3.501—3.502 in.)
Crankshaft Journal (Assembled)
Connecting Rod Bearing-to-Journal Oil Clearance 0.06—0.13 mm (0.002—0.005 in.)
(New Part) Max. Oil Clearance 0.15 mm (0.006 in.)
Connecting Rod Bore (For ID 93.76—93.79 mm (3.6915—3.6925
Crankshaft Journal Bearing) in.)
Connecting Rod Centerline of Piston Dimension 263.95—264.05 mm (10.392—
Pin Bore-to-Crankshaft Bore (New 10.396 in.)
Part)
Rod Pin Bore Without Bushing ID 55.529—55.555 mm (2.1862—
2.1872 in.)
Installed Rod Pin Bushing (Before ID 50.729—50.781 mm (1.9972—
Boring) 1.9992 in.)
Installed Rod Pin Bushing (After ID 50.805—50.830 mm (2.0002—
Boring) 2.0012 in.)
Piston Pin Bushing Bore Out-of-Round 0.038 mm (0.0015 in.)
Piston Pin-to-Bushing Oil Clearance 0.017—0.059 mm (0.0007—0.0023
in.)
Max. Acceptable Wear 0.076 mm (0.0030 in.)
Press Fit of Bushing in Rod Pin Bore Press Fit 0.100—0.163 mm (0.0039—0.0064
in.)
PRECISION JOINT is a trademark of Deere & Company
CTM100 (06APR04)
06-200-11
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=421
Continued on next page
To Next Page
Loading...