Repair and General OEM Specifications
06
200
12
OUO1004,0000BCF –19–02NOV00–4/5
Item Measurement Specification
Connecting Rod Pin Bushing Bore ID 55.529—55.555 mm (2.1862—
(Without Bushing) 2.1872 in.)
Connecting Rod Pin Bushing Press Fit in Rod Pin Bore 0.100—0.163 mm (0.0039—0.0064
in.)
Piston Pin Bushing (After Boring) ID 50.805—50.830 mm (2.0002—
2.0012 in.)
Piston Pin OD 50.772—50.787 mm (1.9989—
1.9995 in.)
Piston Pin-to-Bushing Clearance 0.017—0.059 mm (0.0007—0.0023
in.)
Cylinder Liner Flange Counterbore Depth in Block 9.461—9.512 mm (0.3725—0.3745
in.)
Cylinder Liner Flange Thickness 9.525—9.575 mm (0.3750—0.3770
in.)
Main and Thrust Bearings Assembled ID Without Bearings 133.097—133.123 mm (5.2400—
5.2410 in.)
Main Bearing Surface Width 37.77—38.03 mm (1.487—1.497 in.)
Thrust Bearing Surface Width (No. 5 37.51—38.29 mm (1.476—1.507 in.)
Main)
Overall Thrust Bearing Cap Width 43.25—43.75 mm (1.703—1.722 in.)
Cylinder Block Top Deck Surface Surface Finish (Surface Mill Only) 3.2 micrometers (125 micro-in.)
Finish Max. Wave Height 0.008 micrometers (0.0002 micro-in.)
Max. Wave Depth 2.0 micrometers (79 micro-in.)
Main Bearing Bore Centerline-to-Top Minimum Distance 429.92—430.07 mm (16.926—
Deck 16.932 in.)
Cylinder Block Bore for Seating Liner
Liner Flange Counterbore ID 153.57—153.77 mm (6.046—6.054
in.)
Upper Block Bore for Seating Liner ID 145.845—145.895 mm (5.7419—
5.7439 in.)
Lower Block Bore for Seating Liner ID 140.465—140.515 mm (5.5301—
5.5321 in.)
CTM100 (06APR04)
06-200-12
P
OWER
T
ECH
10.5 L & 12.5 L Diesel Engines
040604
PN=422
Continued on next page
To Next Page
Loading...