Section 23: ACCESSORIES
PA1562
26
10. TIRE PRESSURE MONITORING SYSTEM (TPMS)
The optional active tire pressure and temperature monitoring system is a sensing device designed to
identify and display tire operating data and activate an alert or warning when pressure or temperature
irregularities are detected.
For more information on the operation and troubleshooting of the system, refer to the Operator’s Manual,
chapters “Controls and Instruments”, “Safety Features and Equipment” and also “Appendix G”.
10.1 TIRE VALVE INSTALLATION
Use as required a small rod to hold the valve in place
when tightening.
Steel Wheels
All wheels
a) Install Beru valve
Torque valve to 44.5lb-
in +/- 9.5
b) no extension piece
#Prevost 681083
Front axle and tag axle
wheels with 365 tires–
a) Remove Alcoa valve
b) Install Beru valve
Torque valve to 102lb-
in +/- 22
c) No extension piece
#Prevost 651080
Aluminum Wheels (new Hub-Mounted wheels)
Front axle and tag axle
wheels with 315 tires–
a) Remove Alcoa valve
b) Install Beru valve
Torque valve to 102lb-
po +/- 22
c) Small extension
piece (approx 50mm)
#Prevost 651081
To Next Page
Loading...
