Section 23: ACCESSORIES
PA1562
27
Drive axle inner and
outer wheels with 315
tires–
a) Remove Alco valve
b) Install Beru valve
Torque valve to 102lb-
in +/- 22
c) no extension piece
#Prevost 651081
Aluminum wheels (new Hub-Mounted wheels)
“Super Single” Tires
a) Remove Alcoa valve
b) Install Beru valve
Torque valve to 102lb-
in +/- 22
c) no extension piece
#Prevost 651079
Aluminum wheels (former
Stud-Mounted wheels)
All wheels
a) Remove Alcoa valve
b) Install Beru valve
Torque valve to 102lb-
in +/- 22
c) no extension piece
#Prevost 651082
CAUTION
When replacing Alcoa valve stems, it is recommended to lubricate the threads and O-ring with a non-
water based tire lubricant.
When valve stem extensions are used, it is recommended that valve stem stabilizers be used.
10.2 BERU SENSORS INSTALLATION
IMPORTANT NOTE
Beru sensors have a limited lifespan (5 years on average)
To Next Page
Loading...
