Chapter 5: Settings
GPS (Global Positioning System) Settings
153
Psion EP10 Hand-Held Computer User Manual
5.11.11 GPS (Global Positioning System) Settings
This applet allows you to define how the GPS module operates. You can determine when the GPS module
can draw power and under what conditions, and choose from a set of GPS profiles built into the modem.
You can also set up AGPS (Assisted Global Positioning System) and SBAS (Satellite-based augmentation
system).
• Tap on Start>Settings>System>GPS Settings icon.
Power Tab
This tab allows you to dictate how the GPS module behaves. The GPS Power drop-down menu is used to
control when the GPS is powered on and off.
• Off – the GPS module is left off, always.
• On – the GPS module is powered on at all times regardless of the power state of the EP10 (suspend).
If Enable Smart Power Mode is enabled, the GPS module is powered on, but if the EP10 enters suspend
mode, the GPS module switches to low power mode.
To Next Page
Loading...
