Touchscreen Display
QL-30/60 User Guide 33
2) Select an option in the selection level.
Several options have substructures again with selection levels.
To return from the current level to the upper one select the back arrow icon. To leave the
menu select the home icon.
3) Continue the selection until the parameter/function level is reached.
4) Start a function. The printer will carry out the function possibly after a displaying dialogue.
- or -
Select a parameter to set. The setup possibilities depend on the parameter type.
Table 8: Samples for parameter setting
Logical parameters
Selection parameters
To Next Page
Loading...
Need help?
General
