Radware Alteon User Manual

Alteon Application Switch Operating System Application Guide
Server Load Balancing
Document ID: RDWR-ALOS-V2900_AG1302 179
To view the current buddy server settings for a real server
To configure buddy server health checking
1. Configure an interface.
2. Enable SLB
3. Enable ports for SLB.
4. Configure and enable real servers.
5. Configure real server groups and assign real servers to them.
6. Apply and save the configuration
7. Configure virtual servers and enable HTTP service.
>> Main# /cfg/slb/real <real server number> /adv/buddyhc/cur
>>Main# /cfg/l3/if 1/addr 10.1.11.1/mask 255.255.255.0/ena
>>Main# /cfg/slb/on
>> Main# /cfg/slb/port 2/server en
>> Main# /cfg/slb/port 3/server en
>> Main# /cfg/slb/port 4/server en
>> Main# /cfg/slb/port 5/server en
>> Main# /cfg/slb/port 6/server en
>> Main# /cfg/slb/real 1/rip 10.1.11.30/ena
>> Main# /cfg/slb/real 2/rip 10.1.11.31/ena
>> Main# /cfg/slb/real 3/rip 10.1.11.32/ena
>> Main# /cfg/slb/real 4/rip 10.1.11.33/ena
>> Main# /cfg/slb/real 5/rip 10.1.11.34/ena
>> Main# /cfg/slb/group 2/add 2
>> Main# /cfg/slb/group 2/add 3
>> Main# /cfg/slb/group 2/add 4
>> Main# /cfg/slb/group 2/add 5
>> Main# /cfg/slb/group 2/health tcp
>> Main# Apply
>> Main# Save

Radware Alteon Specifications

General

Model	Alteon
Manufacturer	Radware
Layer	Layer 4-7
Type	Application Delivery Controller (ADC)
Features	Load balancing, SSL offloading, application acceleration, DDoS protection
Form Factor	Virtual Appliance