Alteon Application Switch Operating System Application Guide
ADC-VX Management
Document ID: RDWR-ALOS-V2900_AG1302 449
Upgrading the ADC-VX Infrastructure
The ADC-VX infrastructure is backward- and forward-compatible with AlteonOS. Because of this, when
upgrading the ADC-VX infrastructure software, you are not required to re-certify the AlteonOS for
multiple applications.
To upgrade the ADC-VX infrastructure
1. Access the Active Switch Configuration Boot menu.
2. Enter image, and select the image type used for the upgrade.
Note: If you select no, you must restart the system manually.
ADC Application Image Status Options
The image status options display the current ADC-VX setup.
Caution: You should not remove images that are currently being used by vADCs.
>> Global - Boot Options# image
Enter image type [vx|adc]: vx
ADC-VX Infrastructure Images:
ID Version Downloaded Image status
-- ------- ---------- ------------
1 28.1.0.3 17:41:28 Sun Jan 13, 2013 Idle
2 28.1.0.0 12:45:39 Wed Mar 31, 2013 Active
3 28.1.0.1 17:41:28 Sun Jan 13, 2013 Idle
4 28.1.0.2 12:45:39 Wed Mar 31, 2013 Idle
Enter image ID: (1-4) 3
ADC-VX infrastructure image 3 will become active after a system restart
Do you wish to restart the system? [y|n]n
To Next Page
Loading...
