Configuration Chapter 7
WinLink™ 1000 User Manual Release 1.9 7-8
The right hand drop-down list (showing the current Operating Channel)
allows you to fine-tune the frequency in increments of ±5MHz within a
range of the operating band, which in this example is 5.740 - 5.835 GHz.
When you have completed making your choice, click Next to continue.
Step 4, Hub Site Synchronization Settings
Figure 7-8: HSS Settings
The Synchronization Status dialog box displays the current status of each
side of the link. See Appendix G for instructions about installing and con-
figuring collocated links. If you do not require HSS, click Next.
Step 5, Services
Here is the services dialog:
To Next Page
Loading...
