Upgrading an Installed Link Appendix F
WinLink™ 1000 User Manual Release 1.9 F-2
The default sites shown in the Software Upgrade list panel belong to the
currently link. The list may be empty if you are running the RADWIN
Manager “offline”.
2. Click Add Site to add additional sites for upgrade.
Figure F-2: Add site options
Click Add Single Site for one site only:
Figure F-3: Adding a single site for upgrade
Enter the IP address of the site, the Community strings (Default:
public
and
netman
, respectively) and then click OK. The site will appear in the
Software Upgrade list box. For example if we add the site at IP address
192.168.1.101, the SWU main window of Figure F-1 looks like this:
Figure F-4: Single site added for upgrade
The list can be cleared using the Clear All button.
To Next Page
Loading...
