Monitoring the Links Appendix K
WinLink™ 1000 User Manual Release 1.9 K-12
Monitoring the Links
If the RADWIN Manager is logged in to a link, you cannot run a second copy
of it simply by clicking its desktop icon. It is assumed that your running copy
of the RADWIN Manager is logged into the primary link.
¾ To setup a RADWIN Manager desktop icon for the secondary link:
1. Using copy and paste create a copy of the RADWIN Manager icon on your
desktop.
2. Right-click it to get the properties menu. You should see something simi-
lar to this:
3. Scroll to the end of the Target field, and outside the inverted commas add
a space, followed by the IP address of Site 1.2 for the secondary link. If
for example it is 10.0.0.125, the above Target field would look like
"C:\Program Files\RADWIN\RADWIN Manager\RADWINManager.exe" 10.0.0.125
4. Click OK.
5. At the desktop, re-label the new icon to something recognizable like RAD-
WIN Manager
Secondary
You may now use the new icon to run a second copy of the RADWIN Man-
ager. It will run against the IP address you nominated, bypassing the log on
process.
To Next Page
Loading...
