TDM MHS Status Chapter 8
WinLink™ 1000 User Manual Release 1.9 8-17
Figure 8-14: Bridge Configuration - Site Configuration dialog box
3. In the Information Rate pane, use the drop-down menu to choose the
maximum Information Rate.
Figure 8-15: Ethernet Information Rate - Throughput selection
4. Choose Other to define the throughput with 1 Kbps resolution
5. Choose Best Effort for the highest information rate possible for the link
conditions and settings
6. Click Apply to save the changes.
TDM MHS Status
Here you can see the TDM MHS status. There is nothing to set.
To Next Page
Loading...
