Viewing System Details Chapter 8
WinLink™ 1000 User Manual Release 1.9 8-3
¾ To edit the Configuration Parameters:
1. Click the required site button on the main tool bar of the RADWIN Man-
ager
OR
Click Configuration from the main menu and choose a site to config-
ure.
The Configuration dialog box opens (see Figure 8-1 above).
2. Choose the appropriate item in the left hand list to open a dialog box.
3. Click Apply to save changes.
In subsequent instructions, we will simply say “Choose a site to configure”
on the understanding that the foregoing procedure is implied.
Viewing System Details
This is the first window displayed - as depicted above. You can edit the con-
tact details and site names.
Viewing Air Interface Details
Click the Air Interface item in the left hand list. A window similar to the fol-
lowing appears:
Figure 8-2: Air interface details
The only thing you may change here is the expected Tx power. If for exam-
ple you reduce it to 22, you are first offered a notification window like this:
To Next Page
Loading...
