Site Management: IP Address and VLAN Chapter 8
WinLink™ 1000 User Manual Release 1.9 8-5
Site Management: IP Address and VLAN
Configuring the ODU Address
Each site must be configured separately. For an over-the air configuration,
first configure site B then site A so as to avoid lockout. See Appendix D for
detailed instructions about the best way to do this on-site.
¾ To define the Management Addresses:
1. Choose a site to configure.
The Configuration dialog box opens:
Figure 8-4: Management Addresses - Site Configuration dialog box
4. Choose Management.
5. Enter the IP address of the ODU in the IP Address field.
6. Enter the Subnet Mask.
7. Enter the Default Gateway.
8. Enter the Trap Destination. This could be the IP address of the managing
computer. The events log will be stored at this address.
9. Click Apply to save the changes.
Configuring VLAN Settings
VLAN Management enables separation of user traffic from management
traffic whenever such separation is required. It is recommended that both
sides of the link be configured with different VLAN IDs for management traf-
Note
If performing configuration from the RADWIN Manager, the IP address is
that entered from the Login window.
To Next Page
Loading...
