The procedure Appendix D
WinLink™ 1000 User Manual Release 1.9 D-2
2. For connectorized ODUs, screw the RF terminators into the two antenna
ports.
3. Connect the Poe device to AC power.
4. Using a crossed LAN cable, connect the LAN-IN port of the PoE device to
the Ethernet port of the managing computer. The ODU will commence
beeping at about once per second, indicating correct operation.
5. Launch the RADWIN Manager.
6. At the log on window, choose Local Connection.
Figure D-1: Log on Window for Local Connection
7. Enter the default password,
admin
. After a few moments, the RADWIN
Manager main window appears:
Warning
A powered up ODU emits RF radiation from the antenna port (or connected
antenna). When working with a powered up connectorized ODU, always use
RF terminators.
For an ODU with an integrated antenna, ensure that the antenna is always
directed away from other people.
To Next Page
Loading...
