Radwin WinLink 1000 Series User Manual

Getting Started with the RADWIN Manager Chapter 4
WinLink™ 1000 User Manual Release 1.9 4-3
If you are not using a direct connection as above, ensure that you have
IDU to managing computer connectivity (e.g. through a LAN).
2. Check that you have connectivity to the ODU. You can do this by opening
up a command line session (Start|Run and then type, cmd). At the
command prompt, type
ping 10.0.0.120
You should see something like this:
Figure 4-2: Pinging an uninstalled and unconfigured link
Any other response from ping means that the ODU is not responding.
Check your Ethernet connection and that both the IDU and ODU are
switched on and then try again. If you do not succeed, seek assistance
from RADWIN Customer Support.
3. Dismiss the command line session.
4. Double-click the RADWIN Manager icon on the desktop, or click
Start|Programs|RADWIN Manager|RADWIN Manager.
The Log-on dialog box appears.
Figure 4-3: First time log-on window

Radwin WinLink 1000 Series Specifications

General

Brand	Radwin
Model	WinLink 1000 Series
Category	Network Hardware
Language	English